Before installing kitchen cabinets, you need to ensure the necessary equipment. The list below can be found on the equipment needed to perform.
Boxes
Tape measure
Pencil
4 feet levelHandsaw spirits
Screwdrivers
Drill
Let's begin with steps to install kitchen cabinets to get started.
Step # 1
If you replace old cabinets, make sure they properly disassembled without damage to walls. We advise you to paint the walls with color that will match your new kitchen cabinets. Skip this step if you kitchen cabinets first.
Step # 2
The cross-check that the floor should be installed where the kitchen cabinets are standard. 4 feet of water using the same scale. The point at which the ball moves from side to side of the pipeline, the highest point. Another method to find the highest point is a line, 3 cm above the ground to mark. Measure the distance between the soil line and at various points on this line. Highest point of measurement should be the highest point.
Step # 3
The next step is to take accurate measurements cabinet. Draft agreement corresponding to the wall where the kitchen cabinets will be installed. Mark the height of the cabinets of the highest point with a pencil. 18 cm above this line, select the layout for the upper cabinets. Make sure the rooms where such equipment such as dishwashers, kitchen sinks and countertops should be installed. Thus, in step 3, all you have to do to make the structure of kitchen cabinets to the wall.
Step # 4
After you have finished marking the layout, installation of wall screw to start with a hammer and some nails. The wall studs should be aligned correctly with the layout. Mark the positions on the back of the cabinets.
Step # 5
Now install wall cabinets, corner cabinet from. Drill holes, so they go to the wall studs. Attach the nail right in the hole so as to keep the closet.
Step # 6
To start after installing wall cabinets with cupboards below. As already mentioned, there should be a minimum distance of 18 cm between the upper and lower cabinets. Align the lower cabinets perfect for the wall studs and then install the lower corner cabinet. If you want to attach two cabinets, then drilling holes and secure them through these holes. Use washers to compensate for the cabinets to a non-uniform.
Step # 7
During installation of the cabinets near the sink, make sure to leave room for plumbing. If there are gaps between the lower cabinets, you should not worry how these gaps will be covered when installing kitchen countertops.
Installing kitchen cabinets is an easy task, and you can not ask a professional for the same. But only a day or two to install and kitchen cabinets himself.
Kitchen Cabinetry Sections
- Custom Kitchen Cabinets (55)
- Kitchen Cabinet Refacing (55)
- Kitchen Cabinetry (55)
- Kitchen Cabinets (55)
- Kitchen Cabinets Design (55)
How To Install Kitchen Cabinets - Kitchen Cabinetry
Monday, September 19, 2011
Labels:
Custom Kitchen Cabinets,
Kitchen Cabinet Refacing,
Kitchen Cabinetry,
Kitchen Cabinets,
Kitchen Cabinets Design
Posted by Information at 1:03 AM
Subscribe to:
Post Comments (Atom)
1 comments:
This is a brilliant blog! Thanks for sharing.
Small Kitchen Layout Ideas
Cabinet Design For Kitchen
Bathroom Remodel
Flooring Installation
Post a Comment